1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

V23 - "Other" Requests.

Discussion in 'General Discussion' started by albie0803, Oct 25, 2020.

  1. albie0803

    albie0803 Alibre Super User

    What else would you like fixed? What other things are in your top 10 annoyances?
    Like the official thread, just post a simple, one line description, one per post.
    If someone else has posted a pet hate of yours, just like their post rather than posting the same thing again.

    NOTE:- This is NOT an official thread, it guarantees NOTHING, but it puts it out there and allows a tally of the common ones.
     
    NateLiqGrav likes this.
  2. albie0803

    albie0803 Alibre Super User

    Make "Hide in all Views" page specific rather than for the total file. Affects multipage drawings.
     
    TimoCAD and NateLiqGrav like this.
  3. albie0803

    albie0803 Alibre Super User

    Add option for centrelines and threads to show only on visible faces in drawings.
     
    TimoCAD, simonb65 and NateLiqGrav like this.
  4. Lew_Merrick

    Lew_Merrick Alibre Super User

    My "suggestions" deal with the Drafting module. (1) Being able to set the "default" Font and Pitch for Notes (tied to the Drawing Format files) tops my list here. (2) Being able to define Layer of placement for Item Identities, Bill of Material, Feature Control Block, and the like (also tied to the Drawing Format identity) follows a close 2nd. (3) Being able to have "Character Pitch Offset Tab" identities (such that entering a Tab early on in a Note Line leaps (say) "5X Character Pitch) is my next "I hope for" improvement. -- Lew
     
  5. NateLiqGrav

    NateLiqGrav Alibre Super User

    I'd like a button above the Design Explorer that when clicked returns you back to editing the Assembly for when Edit Here or Edit in Separate Window was used. I would settle for a toolbar button for this.
     
    Gerrit, JamesMC, MilesH and 1 other person like this.
  6. simonb65

    simonb65 Alibre Super User

    I'd like to see the ability to create an offset surface feature that can be used as a target to extrude when extruding sketches. As you can in Solidworks. Would facilitate text/logo's on curved surfaces, stiffening ribs on thin wall and shelled forms, etc
     
    bigseb and jc-s like this.
  7. jc-s

    jc-s Member

    Facility to create groups of features to help organise workflow and make it easier to maintain designs in the future. For example, a group that contains a set of features such as bosses, cuts, fillets etc defines a "feature group". This feature group can then be copied, mirrored etc just like any other feature. Later when you go back to it, the group documents what you've done, and prevents parts of the feature group getting lost if you have to move this feature group to a different part of the hierarchy.
     
    Lew_Merrick and JST like this.
  8. DavidJ

    DavidJ Alibre Super User Staff Member

    Be aware (as Max said) - v23 will very much be about polishing existing capabilities, not adding totally new features.
     
  9. Lew_Merrick

    Lew_Merrick Alibre Super User

    My "requests" in this regard deal with the "grouping" of Constraints such that (say) One "block" of Constraints is turned on to show a specific "operational condition" that automagically turns off a related "block" of Constraints that, when "activated." The "example" I submitted to Alibre (something more than a year ago) was of a piece of farm equipment where "guides" applied in on usage but were "deactivated" and other "guides" applied when the usage was "reversed." Thus, I could define it as (say):

    Group Fwd:
    Constraint <41>
    Constraint <42>
    Constraint <43>​
    End Fwd:
    Group Aft:
    Constraint <44>
    Constraint <45>
    Constraint <46>​
    End Aft:

    Thus, because they are "defined together" either "Fwd" or "Aft" is "active" and the alternate is "suppressed." Would such an ability make things simpler & more powerful for you??? -- Lew
     
    beastro and Drutort like this.
  10. HaroldL

    HaroldL Alibre Super User

    Ahem...I could probably add a few items to this list but just how many threads are we going to have "suggesting" improvements or enhancements to Alibre? It seems like we have new list for each version release and we do have the Feedback section of the forum to post these things. Isn't that enough?
     
    sz0k30 likes this.
  11. Drutort

    Drutort Senior Member

    I think constraints as far as easy tracking of working and broken constraints is a key thing.

    The big issue I have is that something happens in an assembly, and you see a bunch of broken constraints, you have to manual go and click on each to track them.

    Yes the selection should show what they are constraint with the surfaces or what not that are constrained but when those areas are really small features or axis or something else, it is very hard to find them.

    I would like a double click on main constraint and it automatically expands the the constraints in that are in the parts so I can easy track it and look at it.

    Next the broken constraints, I would love it if their would be some past "last known good state" of a constraint so that I could jump and fix whatever it was that caused it to be broken, often If I do not label the constraints what happens I just waste a bunch of time looking and trying to back pedal and find to what the constraint belonged, because if its a generic plane or axis, or both features are gone from the constraint, you get NOTHING!

    Right now this is annoying me, as we got so many nice face lifts to constraints and updates, this area is a big problem
     
  12. Nick952

    Nick952 Senior Member

    Doesn't a RMB click on the Assembly Title/Name in the Design Explorer, already give you the return option?
     
  13. bigseb

    bigseb Alibre Super User

    Yes it does. I think Nate is asking for a toolbar button to do this.
     
  14. NateLiqGrav

    NateLiqGrav Alibre Super User

    Yes I know it does - but in parts with long feature history you must scroll back up to return. Clicking a button (with a fixed position) would remove the action of scrolling, finding, right clicking, and left clicking.
     
    Nick952, beastro and simonb65 like this.
  15. jfleming

    jfleming Senior Member

    A way to "step thru" the features, instead of just "Generate to Last Feature", be able to "Generate to Next Feature"

    and to go along with that, does anyone else find dragging the "dogbone" to be really sensitive???
     
    TimoCAD likes this.
  16. JST

    JST Alibre Super User

    A "single step" command for the design explorer would definitely be of use, although not super high on my list.

    Much higher is a fix for the silly errors messages that occur when applying constraints that have "second steps" to them, like "offset". I've mentioned and demonstrated some common conditions that require clearing two errors before a perfectly "legal" constraint can be applied.

    Also about errors.... Fix the errors during "edit here" by suspending errors during the edit. This is the problem of moving up the design tree, and the real-time linkage of the part during edit.
     
    Last edited: Oct 27, 2020
    TimoCAD and albie0803 like this.
  17. bigseb

    bigseb Alibre Super User

    The 'extrude to surface' tool still doesn't work properly. That could do with putting right.

    Example: extruding a cylinder to a sphere with a 3mm offset.

    01.JPG

    02.JPG

    Just doesn't do it. And yes, this has come up several times in the past. A very handy function that I could have used a lot.

    And... The ability to select multiple surfaces to extrude to. That would be awesome.
     
    IonSteve and MilesH like this.
  18. albie0803

    albie0803 Alibre Super User

    Drawings: Dimensions connected to centrelines often become DISASSOCIATED.

    upload_2020-10-28_14-8-11.png
     
    Gerrit, TimoCAD, jasonmburns and 2 others like this.
  19. JST

    JST Alibre Super User

    What result are you looking for from the "offset" ? A spherical surfac on the end of the extruded part?
     
  20. bigseb

    bigseb Alibre Super User

    Exactly
     

Share This Page