1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Moving a part sketch around, how to?

Discussion in 'Using Alibre Design' started by TimB, Nov 17, 2020.

  1. TimB

    TimB Member

    Hello,

    I'm trying to model a bezel from an enclosure drawing. I kind of figured out how copy / paste the elements of drawing from the DXF file into a part drawing.

    The problem is when I paste it in its miles off the center of the new part. I know I can click and drag one line at a time around but I want to grab all the lines etc and place them center.

    Is this possible?

    Thanks Tim
     
  2. TimB

    TimB Member

    Hi

    Ok I found I can select all cut and use paste stamper. Is there any other systems?

    Thanks Tim
     
  3. NateLiqGrav

    NateLiqGrav Alibre Super User

    Ctl+t is the default keys for the paste stamper. I believe this can be changed in the options to ctrl-v (or anything for that matter) to override the behavior of regular paste method.
     
  4. DavidJ

    DavidJ Alibre Super User Staff Member

    Use dimensions to position the sketch (after fixing size), if you are using Alibre Design , use Sketch -> Move.
     

Share This Page