ok i see what worked, thanks
I tried inserting a plane on the 2 edges of the angle and that didn't work 1st try.
thanks, I will check these suggestions out.
i am trying to constrain the edge of the angle piece to the face of the cylinder, but all it wants to do is constrain to the axis. What am I doing...
ok, thanks. I will see if I can figure that out.
I am trying to figure out how (if possible) to print a hose barb with pipe threads and how o print a block with matching threads so I can screw...
i have drawn a shape that looks like a bullet. the diameter in my 3d part is 0.320"
my 3d printed part is 0.322" in Z
and in X it is .0315"
thanks, I have tried that but then loose the actual shape of the wire design. I draw these to make a mold so my mold will accept the parts that I...
that looks cool. I try that next time. that makes more sense.
thanks, I'll try to remember that when it happens again. I have my shade planes set to "No"
i got it to work,
but I had to go through several steps of guessing.
the error says:
SWEEP_SELF_INT: The sweep results in self-intersecting surface
I just put the circle in place by guessing where to put and get...
I reset the profile and now it works.
mine has started again doing this.
what is causing this?
I guess I spook too soon, naturally it works now.:oops:
i guess I don't know how to use it.:eek:
but if I had not posted I wouldn't have realized...
I wish I could get my Windows Explorer to work like this.
I have windows 10 Pro
I am just guessing but is it related to the indexing?
working on a...
ok thanks for the suggestions. that helps.
I printed a file assuming the dimensions were correct and they were not. so I was wanting to check...
I download some stl files and would like to get dimensions or modify.
i would like to get into Alibre but can't find a way to do this yet.
printed 2 halves with the hook slot, then glued the 2 halves togeather,
Separate names with a comma.